 |
|
Safety and standards (ISO 13284)
MSE-Forks is “world’s standard” for hydraulic fork-lift trucks. All its telescopic forks are produced accordantly to the specific ISO standard 13284. This international safety standard specifies that all forks need to be tested and approved with a safety of 3 just like ordinarily standard lift truck forks. This means that when the nominal capacity is 1000 kg for example, the telescopic forks needs to carry 3000 kg without a permanently deflection. MSE-Forks is not content with this regulation only and therefore an extra safety test is included randomly in its telescopic forks. More |
 |
|
ISO 2330
Third parties are testing Meijer’s telescopic forks to a dynamic duration test of 1 million cycles with an overload of 25%. This extreme safety test is being done including all their drillings, like oil channels and cylinder holes. This test shows that the well-known hydraulic forks can be used safe just like standard long forks. Considering that the forces in the materials are the same for both, standard forks and hydraulic forks, the safety regulations ISO 2330 for standard forks should also be the same for telescopic forks. More |
 |
|
ISO 4406
During the process of honing and boring, little metal and rub pieces can stay in the basic forks. These little parts can be disastrous for the hydraulic system of the fork-lift truck when the telescopic forks are being connected to the hydraulic system of the fork-lift truck. MSE-Forks is able to make the hydraulic oil very clean again with a special designed filtering system and meets a purity class NAS3 / ISO 12/8. The risk that the oil from the hydraulic forks will damage the hydraulic circuit of the lift truck is minimized. More |
 |
|
ISO 3834-2
The European standard ISO 3834-2 represents quality demands for welding and for fusion welding of metallic material. For the best possible result of a weld one has to meet certain conditions. For example welding qualifications, method qualifications, technical design and management and storage of welding additives. Every weld made until now had to be tested and described by an independent inspection service. With this standard the safety of the KOOI-REACHFORKS® is even more guaranteed. More |
 |
|
ISO 2328
Most of the sold hydraulic forks are being mounted onto fork-lift trucks that use standard fork lift carriers; some are being mounted onto special carriers. As mentioned earlier, MSE is able to do all necessarily wildings accordance ISO 3834-2 welding procedures. For standard lift truck mounting carriers’ the hydraulic forks comply with ISO 2328. More |
 |
|
ISO 9001-2000
All standards MSE is using are integrated in their internal quality regulations. All materials, parts, testing procedures etc. are part of the ISO 9001:2000 standards. The total ISO 9001:2000 is yearly approved by the Bureau Vertitas Group. More |